Alu Doubler P
ALU Doubler P performs the double bending of the finished layer, creating a clean finished edge and also protecting the aluminum core from potential corrosion and atmospheric agents.
The full process made by Alu Doubler F and Alu Doubler P with the manual punch press allows to obtain alu honeycomb panels with protected edges and corners.
BENDING ALUMINUM HONEYCOMB PANELS:
– for 90° bend min 6 mm – max 25 mm (min skin thickness 0,5 mm – max 1,0 mm) length, min. 120 mm, width min. 110 mm
– for 180° bend min 6 mm – max 15 mm (min skin thickness 0,5 mm – max 1,0 mm) length, min. 120 mm, width min. 110 mm
Centralized hood suction system in a unique tube (Opt. LOAB31) allows to eliminate the wood chips through the suction system
Non-slip pad guarantees a firm grip of the panel.
Double row of rubber rollers are assembled on a very sturdy beam to manually adjust the pressure placed on the panel.
To guarantee accuracy when processing larger panels, it will be necessary to employ additional supports when feeding the panels into the Alu Bender.
The supports are equipped with adjustable feet and sliding rollers to create a safe work environment for the operator when processing large panels.